SMALL CONVEYOR SYSTEM OVERVIEW
JIT’s small line conveyor system is a fully featured powder coating line designed to offer powder coating options for short runs or special color work at competitive pricing.
260 feet conveyor that is rated for 25 lbs per foot
Has a maximum part window of 4 ½ ft high by 2 ¼ ft wide by 12 ft long
Average line speed 3 FPM
JIT SMALL LINE WASHER SYSTEM
JIT Powder Coating’s small line conveyor washer is a heated 5 stage spray wash system with RO rinse. It is capable of using either traditional Iron Phosphate or Zirconium pretreatment chemistries based on end user requirements.
JIT SMALL LINE CURING SYSTEM
JIT Powder Coating’s small line conveyer has a combination IR / convection oven. This allows JIT to cure parts for all parts; even those that have substantial mass.
JIT SMALL LINE POWDER COATING SYSTEM
JIT Powder Coating’s small line conveyer uses GEMA Op-flex and Op-flex 2 manual application equipment. Powder is not reclaimed on the small line.
JIT SMALL LINE QC AND PACKAGING
Every part on JIT Powder Coating’s small line conveyor system is visually inspected prior to packaging. Additional QC tests are performed on each batch of parts for critical parameters such as film thickness, color and gloss. (See QC section for more details)
Parts are packaged per customer request using a variety of packaging materials (foam, paper, bags) and returned in containers or on pallets as received. Packaged parts are reviewed on final time when loaded to insure the finish parts will not be damaged in transportation.