JIT’s main production conveyor line is an 850 foot long powered, variable speed system. Line hooks, rated at 75 pds capacity each, are spaced 1 foot apart. This gives us one of the heaviest capacity conveyor lines in the Twin City area.

The part window is 11 feet long by 5 feet high by 3 feet wide. Conveyor speed can be adjusted to meet product specific requirements. At 8 feet per minute, it takes a little more than 2 hours to complete a trip through the entire line

The pretreatment system is a 6 stage enclosed spray system capable of dealing with steel or aluminum interchangeably. Chemicals are provided by DuBois. The system is maintained in real time using automated dispensing equipment. A non chrome sealer can be added at stage 5, followed by an RO treated fresh water final rinse.

We use a GEMA Magic spray booth system to apply the powder. The system features 8 automatic spray guns plus manual touch up before and after the automatics, as required. We have reclaim capabilities for longer running jobs. A typical color change takes less than 12 minutes.

Our gas fired convection cure oven provides 250 linear feet of oven exposure, allowing us to properly cure parts with substantial mass.

A full time inspector assures customer finish requirements are met. Final packaging is done to standard or customer specified requirements.